Trimble GCS900 3D GPS MS992 & CB460

For Sale Demo unit Trimble GCS900 Dual Machine Control 3D GPS With Dual MS992 and CB460 Display, it is 900 MHz and is compatible with most Trimble 900 MHz base stations, includes a full grader wiring set-up w/ brackets and mounts.

$10,500

Product Description

For Sale Demo unit Trimble GCS900 Dual Machine Control 3D GPS With Dual MS992 and CB460 Display, it is 900 MHz and is compatible with most Trimble 900 MHz base stations, includes a full grader wiring set-up w/ brackets and mounts. These are all in great working condition, tested and guaranteed with a 90 Day Warranty.

Trimble GCS900 Dual Machine Control 3D GPS With Dual MS992  and CB460 Display sales Includes :

  • (1X) Trimble CB460 Display V. 12.50
  • (2X) Trimble MS992 Smart Antenna Heads GPS/GLONASS/GNSS and Precision RTK Enabled
  • (1X) Trimble SNR920 Radio, 900 MHz and 2.4 GHz Enabled w/ Antennas Motor Grader Wiring w/ Brackets and Mounts
  • (2X) Trimble AS400 Slope Sensors
  • (2X) Trimble RS400 Rotation Sensor
  • (1X) Trimble DCM300G Modem
  • (1X) Trimble VM430 Valve Module
  • (1X) Trimble PM400 Power Module
  • (2X) Trimble Machine Control Masts
  • (2X) Trimble Angled Risers
  • (2X) Coil Cables This system is perfect for Dozers, Graders, Excavators and Scrapers.
  • (2X) Hard Pelican Case to Protect Your Equipment

Trimble MS992 GNSS Smart Antenna:
The Trimble MS992 GNSS Smart Antenna contains an integrated GNSS receiver, antenna, and isolation system in a single, rugged housing that can withstand even the toughest construction site environments. It is also the only commercially available GNSS antenna that offers the performance enhancements of a new Trimble RTK engine and supports the newest GNSS signals. All that means increased machine productivity and utilization in areas that were previously difficult to use GPS machine control. Designed for rugged operation on Trimble GCS900 Grade Control Systems and CCS900 Compaction Control Systems.

The MS992 is available in single or dual configurations on the following machine types:

  • Dozers
  • Graders
  • Excavators
  • Scrapers
  • Pull-type Scrapers
  • Soil Compactors
  • Asphalt Compactors

Features and Benefits:

  • Advanced RTK engine for faster initialization times when satellite lock is lost, and enhanced performance near obstructions.
  • Support for GLONASS, Galileo, BeiDou.
  • Support for SBAS systems (including: WAAS, EGNOS, MSAS, QZSS).
  • Single, rugged cab or blade mountable GPS antenna, receiver, and isolation system.
  • 3 LED indicators provide instant operational feedback. Single cable connector (high cycle count connector).
  • 100% sealed housing.
  • Meets EU Restriction on Hazardous Substance (RoHS) directives.
  • TCP/IP capable using a serial PPP connection.
  • Easy-to-use removable mounting bracket with quick release adjustment
  • Ratchet

Trimble CB460 Control Box:
The Trimble CB460 Control Box is the premium display for all machine types in the Grade Control System. The CB460 offers the same key features as the CB450, plus:

  • A large, easy-to-read 7” (17.78 cm) full-color LCD display
  • Support for internal or external lightbars
  • Faster data transfer via Ethernet connection
  • Adjustable brightness
  • USB data port
  • 3.7GB of internal disk space
  • Ability to create new designs in the field and select which coordinate system to apply
  • Flexible upgrade options that allow a user to purchase the exact functionality they need

Designed for use with the Trimble GCS900 Grade Control System and CCS900 Compaction Control System, the rugged new LCD display offers several benefits for operators running in 2D or 3D mode. The Trimble CB460 Control Box is the new premium display for the Trimble CCS900 Compaction Control System and the Trimble GCS900 Grade Control System portfolio. It is the replacement for the Trimble CB430 Control Box, which is being discontinued for those applications.

Enhanced Operator Experience on all GCS900 Machine Types
The new Trimble CB460 enhances the operator experience with a large 7” screen display of 3D profile information, grade guidance, and warnings – that is the same size as the older CB430 Control Box and 61% larger than the CB450 Control Box. While maintaining the same display size, the total size of the unit housing is smaller than the Trimble CB430 Control Box, allowing more flexibility with mounting in tight spaces. Adjustable brightness capability and viewing angle accommodate different operational lighting conditions, while reducing operator fatigue and errors. The CB460 uses icons for the main guidance softkeys instead of text strings previously used in the Trimble CB430 display. Softkeys are now easier to read and provide a more modern interface for the user. Four integrated LED lightbars make it simple to monitor grade guidance information while also viewing conditions on the site. The CB460 can also be supplemented with external lightbars.

Create New Designs and Apply the Desired Coordinate System in the Field
Using the CB460, an operator can create new designs (level, slope or map) on the display and define what coordinate system to use with this new design, either the last used coordinate system, a coordinate system located on the displays storage disk or a new coordinate system based on the current location. This in-field functionality offers several benefits, including:
The ability to keep horizontal and vertical positions consistent at each site when using designs generated in the field.
The ability to select which coordinate system to apply. Having the wrong coordinate system loaded even when creating new designs has the potential of giving bad guidance.
The ability to create infield designs including infield coordinate system definition for use on sites that do not yet have a defined coordinate system

Data Transfer via USB memory stick
The CB460 utilizes internal memory for storing designs, machine files and machine production information. Using any USB memory stick, the user can easily load design files and firmware to the control box, download machine production files and load firmware to the control box. File transfer and archiving rules prevent operators from accidently deleting or overwriting files on the CB460. USB data transfer also increases compatibility with Trimble Site Positioning System controllers which also have USB ports. This allows for easy data exchange between surveyors, grade checkers, site supervisors and machine operators – e.g. data can be synchronized to a site supervisor who can then rapidly deploy or retrieve data from a Trimble Tablet or TSC3 to or from the machine control system using a USB stick.

Flexible Upgrade Options Make it Easy to Order the Right Level of Functionality
Trimble CB460 Control Box can be configured for different functionality levels, based on the requirements of the customer. Trimble CB460 Control Box requires activation with option keys to enable desired 2D or 3D functionality. In general, the following functionality levels are available through the Trimble Store:

  • 2D indicate plus Automatics
  • 3D Indicate (includes 2D indicate + Automatics)
  • 3D Automatics (includes 3D indicate)